Locating the OBD2 port in your 1999 Honda CRV can sometimes be less straightforward than expected. Unlike some vehicles where the diagnostic port is prominently placed under the steering wheel, the first generation CRV (1996-2001) may have its OBD2 port in a slightly different location. If you’re trying to connect a scan tool to diagnose a check engine light or monitor your vehicle’s performance, knowing exactly where to look is crucial.
For the 1999 Honda CRV, the OBD2 port is typically found on the passenger side of the vehicle. You’ll need to look under the dashboard area. It’s often positioned near the center console, but it might be tucked away and not immediately visible.
To find it, start by checking the area beneath the glove compartment and towards the center of the dashboard on the passenger side. You might need to get down and look upwards. The OBD2 connector is usually a 16-pin trapezoidal shaped female connector. It may be mounted on a bracket or simply hanging freely amongst the wiring.
Sometimes, the connector can be pushed back or hidden behind trim panels. If you don’t see it right away, carefully feel around behind any plastic panels or brackets in the passenger side footwell area. Referencing diagrams or videos online specific to the 1999 Honda CRV can also be incredibly helpful in visually guiding you to the exact location.
OBD2 Connector Diagram
Image: Diagram illustrating the typical pinout and shape of an OBD2 connector, often used for diagnostic purposes in vehicles like the 1999 Honda CRV.
Once you locate the OBD2 port, ensure it is clean and free from any debris before attempting to connect your diagnostic tool. Having trouble finding it can be frustrating, but with a systematic search on the passenger side, you should be able to locate the OBD2 port on your 1999 Honda CRV and proceed with your vehicle diagnostics.
