Are you experiencing issues with your 2020 Audi Q3 key fob? Perhaps it’s becoming difficult to lock or unlock your doors, or maybe you’ve noticed a warning symbol on your dashboard. These are common signs that your Audi Q3 key fob battery is running low and needs to be replaced. Don’t worry, replacing the battery in your 2020 Audi Q3 key fob is a straightforward process you can often do yourself. This guide from our service experts at obd-de.com will walk you through each step, ensuring you can get back on the road with a fully functional key fob.
Many 2020 Audi Q3 owners find themselves needing a battery replacement after a couple of years. While you can always schedule a service appointment, understanding how to perform this simple task yourself can save you time and money. Let’s explore the process of a 2020 Audi Q3 Battery Replacement.
Step-by-Step Guide to Replacing Your 2020 Audi Q3 Key Fob Battery
For the 2020 Audi Q3, you’ll likely encounter the newer style flip key fob or the smart keyless entry remote. Both are relatively easy to handle for a battery replacement. Here’s how to replace the battery in each type:
Replacing the Battery in a 2020 Audi Q3 Flip Key Fob
If your 2020 Audi Q3 uses a flip key fob, follow these instructions:
- Acquire the Correct Battery: You will need a CR2032 battery for your 2020 Audi Q3 flip key fob. These batteries are widely available at most drugstores, supermarkets, and online retailers.
- Flip Out the Metal Key: Locate the key release button on your fob and flip out the metal emergency key blade.
- Locate the Notch: With the metal key flipped out, look for a small notch inside the key compartment. This notch is designed to help you open the battery casing.
- Pry Open the Battery Cover: Carefully insert a small flathead screwdriver or a similar thin tool into the notch. Gently twist or pry to pop open the battery cover. You might also be able to use the emergency key itself for this step.
- Remove the Battery Cover: Once popped open, gently pry the cover away from the back of the fob, near where the keyring loop is located.
- Replace the Old Battery: Remove the old CR2032 battery. Take note of which side is facing up (positive side). Install the new CR2032 battery in the same orientation, ensuring the positive side is facing upwards.
- Reattach the Battery Cover: Carefully place the battery cover back onto the key fob. Make sure the plastic notches are aligned correctly to ensure a secure closure. Gently press until the cover snaps back into place.
Replacing the Battery in a 2020 Audi Q3 Smart Keyless Entry Remote
If your 2020 Audi Q3 is equipped with a smart keyless entry remote, the battery replacement process is slightly different, but still manageable:
- Obtain a CR2032 Battery: Just like the flip key, the 2020 Audi Q3 smart key fob also uses a CR2032 battery.
- Remove the Metal Key Blade: Locate the release button and remove the metal emergency key blade from the smart key fob.
- Find the Notch: Look for a small notch where the metal key blade was housed. This notch is your access point to open the fob.
- Pry Open the Fob Shell: Insert a flathead screwdriver into the notch at an angle, pointing towards the center of the key fob. Carefully rotate the screwdriver to gently pop open the key fob shell.
- Battery Replacement: Once open, remove the old CR2032 battery and replace it with a new one. Ensure the positive side of the battery is facing upwards, matching the orientation of the old battery.
- Snap the Cover Back On: Carefully align the two halves of the key fob shell and snap them back together until they are securely closed.
What To Do If Your 2020 Audi Q3 Key Fob Is Not Recognized After Battery Replacement
In most cases, after a 2020 Audi Q3 battery replacement, your key fob should work immediately. However, if you find that your car doesn’t recognize the key after replacing the battery, don’t panic. Sometimes, the key may need to be re-initialized or resynchronized. Here’s a simple method you can try:
- Manual Door Lock Re-sync: Insert the metal key blade into the driver’s side door lock.
- Manually Lock and Unlock: Use the key to manually unlock and then lock the driver’s side door.
- Test the Remote: Remove the key from the door and press the “unlock” button on your key fob.
This process often helps the car recognize the key fob again. If this doesn’t work, or if you continue to experience issues with your 2020 Audi Q3 key fob, it’s best to consult with Audi service professionals.
Cost of 2020 Audi Q3 Key Battery Replacement
The cost of a 2020 Audi Q3 battery replacement is quite minimal if you do it yourself. A CR2032 battery typically costs between $5 to $15 depending on the brand and retailer. This makes it a very affordable DIY task.
If you prefer to have a service professional handle your 2020 Audi Q3 battery replacement, the cost will include labor. While it will be more expensive than doing it yourself, it ensures the job is done correctly, and you can have peace of mind. For specific pricing on Audi key battery replacement service, it’s always best to contact your local Audi service center, such as Audi Fletcher Jones.
Get Expert Audi Service for Your 2020 Q3
While replacing your 2020 Audi Q3 key fob battery is usually a simple process, our team at obd-de.com and Audi Fletcher Jones are always here to assist with any of your Audi service needs. If you have any questions or prefer professional assistance with your 2020 Audi Q3 key battery replacement or any other Audi service or parts, don’t hesitate to reach out to our experts. We are dedicated to providing top-notch service and ensuring your Audi experience is always excellent.
