Experiencing problems with your Edge CTS2 monitor? Many users rely on the Edge CTS2 for real-time data and performance monitoring via the OBD2 port. However, issues can arise, particularly with the OBD2 cable and sensor connections. This article delves into a firsthand account of troubleshooting a potential problem related to the “Edge Cts2 Obd2 Cable” and external sensor connections, offering insights for those facing similar challenges.
The user initially encountered a perplexing issue: the gauge cluster of their vehicle began malfunctioning. After a process of elimination, the focus shifted to the external sensors connected to their Edge CTS2 device. To isolate the problem, the user undertook a systematic approach. Driving the vehicle for a week with the external sensor plugs and sensors disconnected led to a significant observation – the gauge cluster operated flawlessly without any further issues.
This test strongly suggested that the root cause of the gauge cluster malfunction was not the Edge CTS2 device itself, but rather an issue stemming from the sensor cables. The likelihood of all three sensors failing simultaneously seemed improbable. Even after replacing two of the pressure sensors with brand new components, the problem persisted, further reinforcing the suspicion that the “edge cts2 obd2 cable” and associated sensor wiring were the source of the trouble.
Seeking resolution, the user contacted Edge customer support. Initially, the support team indicated that the device had passed internal testing. However, they did not request the sensor cables for evaluation, which seemed like a critical oversight given the symptoms. Undeterred, the user persisted, emphasizing the troubleshooting steps taken and the strong indication of cable-related problems. This persistence led to a change in approach from Edge, and they finally requested the sensor cables and sensors to be sent in for testing.
It’s worth noting that Edge has reportedly faced previous issues with EGT (Exhaust Gas Temperature) sensors, requiring replacements for many users. While the current issue might be cable-related, the user’s experience highlights a potential area for improvement in Edge’s diagnostic process – particularly in considering cable integrity alongside device functionality. The cost of replacement cables can be significant, exceeding $300, adding to user frustration when dealing with potential known issues. This real-world account serves as a valuable lesson for Edge CTS2 users and a reminder to thoroughly investigate all components, including the “edge cts2 obd2 cable” and sensor connections, when troubleshooting device-related problems.
