For Dodge Charger enthusiasts looking to tap into the true potential of their vehicles, an OBD2 gauge is an indispensable tool. The P3 V3 OBD2 Gauge offers a seamless and powerful way to monitor your Charger’s performance, directly from your car’s computer. Forget bulky, aftermarket gauges that clash with your interior – the P3 V3 integrates directly into your vent for a clean, OEM look while providing crucial data at a glance.
Key Features of the P3 V3 OBD2 Gauge for Your Dodge Charger
The P3 V3 Gauge is packed with features designed to give Dodge Charger owners comprehensive vehicle information and control:
- Effortless Plug and Play Installation: Simply connect the P3 V3 directly into your Dodge Charger’s OBD2 port. No complicated wiring or cutting required. For those who need constant OBD2 port access, a hard-wire harness kit is also available.
- OEM Vent Integration for a Sleek Look: Maintain the factory aesthetic of your Dodge Charger’s interior. The P3 V3 Gauge installs discreetly in your air vent, preserving airflow while offering a high-tech display.
- Versatile Boost Monitoring: Whether your Dodge Charger is naturally aspirated or supercharged, the P3 V3 can read boost pressure through OEM sensors via the OBD2 port. For enhanced accuracy, you can also use the optional P3 analog boost sensor.
- On-Demand Diagnostic Trouble Code (DTC) Reading and Clearing: Take control of your Dodge Charger’s diagnostics. Read and clear DTCs directly from the P3 V3 Gauge, helping you identify and resolve issues quickly.
Comprehensive Performance Readouts for Dodge Charger
The P3 V3 OBD2 Gauge provides a wealth of real-time data, allowing you to monitor critical aspects of your Dodge Charger’s performance. All readouts are configurable to display in Imperial or Metric units, catering to your preference.
- Boost Pressure: Keep a close eye on your Dodge Charger’s boost levels (if applicable) to ensure optimal performance and identify potential issues.
- Coolant Temperature: Monitor your engine’s coolant temperature to prevent overheating and maintain engine health, especially during demanding driving conditions.
- Vehicle Speed: Verify your Dodge Charger’s speed, with calibration options in 1% increments (-9% to +20%) for accuracy after modifications like wheel or tire changes.
- Intake Air Temperature (IAT): Track intake air temperatures to understand your Dodge Charger’s air intake efficiency and identify potential heat soak issues.
- Throttle Angle: Observe your throttle position in real-time, providing insight into your Dodge Charger’s responsiveness and control.
- Ignition Timing: Monitor ignition timing advance or retard, a crucial parameter for engine tuning and performance optimization.
- Engine RPM: Get precise engine speed readings, essential for performance driving and shift point optimization in your Dodge Charger.
- Exhaust Gas Temperature (EGT): (Requires optional sensor) Monitor exhaust gas temperature to prevent engine damage in high-performance Dodge Charger applications.
- Battery Voltage: Keep track of your Dodge Charger’s battery health to avoid electrical issues and ensure reliable starts.
- Programmable Shift Light: Customize shift points with the integrated shift light, improving your Dodge Charger’s acceleration and performance during spirited driving.
- Analog Inputs: Expand the gauge’s capabilities with two analog inputs for reading data from 0-5 volt linear output sensors, allowing for custom sensor integration in your Dodge Charger.
- Acceleration and Braking Timers: Measure your Dodge Charger’s performance with built-in timers for 0-60mph, 0-100mph, 60-130mph acceleration, and 60-0mph, 100-0mph braking tests.
Optional Enhancements for Your P3 V3 Gauge
Further personalize your P3 V3 Gauge with optional add-ons:
- OEM Chrome Trim Ring: For an even more integrated appearance in your Dodge Charger’s vent, opt for the OEM chrome trim ring.
Designed for Durability and Reliability
The P3 V3 OBD2 Gauge is engineered to withstand the harsh conditions of the automotive environment. It has been rigorously tested to ensure functionality in extreme temperatures, from freezing cold to intense heat, guaranteeing reliable performance in your Dodge Charger regardless of the climate.
Unlock Your Dodge Charger’s Potential with the P3 V3 OBD2 Gauge
The P3 V3 OBD2 Gauge is more than just a display; it’s a powerful tool that provides Dodge Charger owners with the information they need to understand and optimize their vehicle’s performance. Its easy installation, comprehensive readouts, and OEM integration make it the ideal choice for enthusiasts looking to get the most out of their Dodge Charger.
For detailed installation and configuration information, visit the V3 install page. If you need further assistance, contact their support team for expert help.
