For BMW and Mini enthusiasts looking to unlock hidden features and customize their vehicles, the BimmerCode app is a powerful tool. To get started, you’ll need a reliable OBD2 adapter, and Veepeak OBDCheck BLE and BLE+ are popular, compatible choices. This guide will walk you through the steps to connect your Veepeak OBD2 adapter with the BimmerCode app on both Android and iOS devices, ensuring a smooth and successful coding experience. Please note that BimmerCode compatibility is for BMW and Mini models, excluding pre-2008 vehicles and G series. Always verify your car and adapter compatibility on the BimmerCode website before proceeding.
Connecting Veepeak OBD2 with BimmerCode on Android
Setting up your Veepeak OBD2 adapter with BimmerCode on an Android device is straightforward. Follow these steps to establish a stable Bluetooth connection:
-
Begin by plugging your Veepeak device into the OBD port. This port is typically located in the driver’s side footwell area. Once plugged in, turn on your vehicle’s ignition to power up the adapter.
-
To ensure a dedicated connection, disconnect any existing Bluetooth connections to your car’s iDrive system or other devices.
-
Activate Airplane mode on your Android phone. This disables all wireless connections, which you will then selectively re-enable.
-
Turn Bluetooth back on while Airplane mode is still active.
-
Navigate to your Android phone’s Bluetooth settings. You will need to pair your phone with the Veepeak adapter, which should appear as “VEEPEAK” in the list of available devices.
-
Open the BimmerCode app and go to the “Settings” menu. Within settings, locate the adapter type selection and choose “Veepeak OBDCheck BLE/BLE+”.
-
Finally, return to the BimmerCode app start screen and tap “Connect”. The app will now attempt to establish a connection with your Veepeak OBD2 adapter.
Connecting Veepeak OBD2 with BimmerCode on iOS
Connecting your Veepeak OBD2 adapter to the BimmerCode app on an iOS device requires a few specific steps to ensure proper communication. Follow this guide for a successful setup:
-
First, plug the Veepeak adapter into the OBD port of your BMW or Mini, located in the driver’s side footwell. Turn on the ignition to power the adapter.
-
Enable Airplane mode on your iOS device to minimize interference and ensure a stable Bluetooth connection.
-
Turn Bluetooth on again while Airplane mode is enabled.
-
It’s crucial to turn off Wi-Fi on your iOS device. Wi-Fi can sometimes interfere with the Bluetooth connection needed for OBD2 adapters.
-
Disable CarPlay in your iOS settings. Go to “Settings” > “General” > “CarPlay”, select your car if listed, and choose to “Disable CarPlay”.
-
Disconnect your iOS device from the car’s iDrive system. In iDrive, go to “COM” > “Mobile devices”, select your device, and choose “Disconnect device”.
-
Disconnect any other Bluetooth devices that might be connected to your iOS device to avoid conflicts.
-
Keep your iOS device as close as possible to the Veepeak adapter during the connection process to ensure a strong signal.
-
Open the BimmerCode app settings and select your adapter type as either “OBDCHECK BLE” or “BLE+”.
-
Go back to the start screen of the BimmerCode app and tap “Connect”. The app will now connect to your Veepeak OBD2 adapter, and you can begin coding your BMW or Mini.
For more detailed information and troubleshooting tips, refer to the official BimmerCode Apps Guide. With these steps, you’ll be well on your way to customizing your car with the Veepeak Obd2 App and BimmerCode.
