Unlock Your Audi 8Y S3/RS 3’s Performance Data with the P3 OBD2 Gauge

For Audi 8Y S3 and RS 3 owners seeking a seamless and comprehensive way to monitor their vehicle’s performance, the Unitronic P3 V3 OBD2 Gauge stands out as the ultimate solution. This advanced gauge provides a wealth of real-time data, directly from your car’s OBD2 port, allowing you to keep a close eye on critical parameters without cluttering your dashboard.

The P3 Obd2 Gauge delivers an extensive array of readouts, ensuring you have all the vital information at your fingertips. Monitor your boost pressure with precision, utilizing OEM sensors or an optional P3 analog boost sensor for enhanced accuracy. Stay informed about your engine’s coolant temperature to prevent overheating and ensure optimal performance. Keep track of your air/fuel ratio, displayed in either AFR or Lambda, for efficient engine management. Accurately measure your vehicle speed, with user-calibration available in 1% increments from -9% to +20% to account for aftermarket modifications.

Furthermore, the P3 Gauge displays crucial intake parameters such as intake air temperature and throttle angle, giving you insights into your engine’s breathing. Observe your ignition timing and engine RPM for performance analysis, and monitor exhaust gas temperature to safeguard against potential issues. Keep an eye on your battery voltage to ensure your electrical system is healthy. For performance enthusiasts, a programmable shift light is integrated to optimize gear changes.

For advanced users and custom sensor integration, the P3 V3 OBD2 Gauge features analog input channels. Analog input 1 (brown wire) and Analog input 2 (blue wire) are ready to read any 0-5 volt linear output sensor, expanding the gauge’s capabilities beyond standard OBD2 data. Performance testing is also built-in with acceleration timers for 0-60mph, 0-100mph, and 60-130mph runs, as well as braking timers for 60-0mph and 100-0mph testing.

The P3 V3 Gauge elevates the OBD2 multi-gauge experience with enhanced user control. You can effortlessly read and clear DTCs (Diagnostic Trouble Codes) on demand, allowing for quick diagnostics. Customize your display by removing PIDs (Parameter IDs) you don’t need to streamline the presented information. Personalize your readings with configurable unit settings for individual measurements and calibrate your vehicle speed for accuracy. For users preferring Lambda readings, the gauge supports AFR in Lambda display.

Forget bulky and intrusive pillar or column pods. The P3 OBD2 Gauge maintains an OEM-plus aesthetic, seamlessly integrating into your Audi’s interior without disrupting its clean lines. Its bold and bright display ensures information is easily readable at a glance, eliminating the strain of squinting at small, pixelated screens common with other gauges.

Durability is a cornerstone of the P3 design. These gauges are torture-tested to withstand extreme conditions, from freezing temperatures as low as -94°F to scorching heat exceeding typical in-car environments. This rigorous testing ensures reliable performance and longevity, regardless of climate.

As a special offering through our exclusive collection, the P3 V3 OBD2 Gauge comes engraved with the Unitronic logo, adding a touch of distinction to your performance monitoring setup. Upgrade your Audi 8Y S3 or RS 3 with the P3 OBD2 Gauge and gain unparalleled insight into your vehicle’s performance data in a sleek, reliable, and user-friendly package.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *